Miele KFN 12823 SD ed Operating And Installation Instructions Download Page 58

Page: 58 / 64

The appliance doors can be aligned
with the appliance housing after being
mounted back into place.

In order to more clearly illustrate the
necessary steps, the following figures
do not show a closed door.

Align the

lower door

using the outer

slotted holes in the lower hinge plate:

Remove the centre screw

on the

hinge plate.

Slightly loosen the two outer screws

Align the door by sliding the hinge
plate to the left or right.

Then, firmly tighten the screws

Screw

does not need to be

refastened.

Align the

upper door

using the slotted

holes in the middle hinge plate:

Slightly loosen the two screws

Align the door by sliding the hinge
plate to the left or right.

Then, firmly tighten the screws

Aligning the appliance doors

Summary of Contents for KFN 12823 SD ed

































































Search results

Summary of Contents for KFN 12823 SD ed

Reviews:

Related manuals for KFN 12823 SD ed

Brands by name

Popular brands

Miele KFN 12823 SD ed, Operating And Installation Instructions

Search results

Summary of Contents for KFN 12823 SD ed

Reviews:

Related manuals for KFN 12823 SD ed

Brands by name

Popular brands