Miele KFN 12823 SD ed, Operating And Installation Instructions

Page: 29 / 64

Moving the shelves
The shelves can be adjusted according
to the height of the food:
^
Lift the shelf, pull it forwards slightly,
lift the notch over the support ribs
and move the shelf up or down.
The raised edge at the back of the shelf
must face upwards to prevent food
from touching the rear wall and freezing
to it.
Stops prevent the shelves from being
pulled out accidentally.
Split shelf
In order to accommodate tall items,
such as large bottles or containers, a
split shelf has been provided. The front
section can be gently slid underneath
the rear section:
^
Push the rear half of the glass shelf
slightly upwards.
^
With the rear half pushed up, lift the
front half of the glass shelf slightly,
then slide it carefully underneath the
rear half.
To move the glass shelf halves:
^
Remove both halves of the shelf,
^
Place the two support rails on the left
and right support ribs at the desired
height and
^
Slide the glass shelves in one after
the other.
The shelf with the raised edge must
be at the back.
Moving the door shelf / bottle
shelf
^
Lift up the door shelf / bottle shelf
and pull forward to remove.
^
Replace the door shelf / bottle shelf
at the desired height. Make sure that
it is properly and securely pushed
back into position.
Adjusting the interior fittings
29