Reattaching the door handles:
It is critical that you follow the
instructions below for attaching the
door handle. An improperly
mounted handle will damage the
door seal.
^
First, loosely screw the door handle
onto the opposite side using the two
front screws
b
.
The mounting plate
c
must be
positioned on the side of the door such
that, when the door is
closed
, the
mounting plate is flush with the side
wall of the appliance.
If this is not the case,
^
Turn the two pre-mounted set screws
a
with a hex key until the mounting
plate
c
is positioned at the correct
angle.
^
Firmly tighten all 4 screws
b
.
^
From the appliance side, slide the
sidebar
d
into the guide on the
mounting plate until it clicks into
place.
Make sure that the sidebar
d
does
not come into contact with the door
seal when the door is opened. Over
time, this will damage the seal.
If the sidebar does touch the seal:
^
Realign the mounting plate
c
using
the set screws
a
until the mounting
plate and the sidebar
d
are at the
correct angle and the sidebar no
longer touches the seal when the
door is opened.
Reversing the door hinging
57
Summary of Contents for KFN 12823 SD ed
