Miele HR 1622-3 i Operating Instructions Manual Download

Page: 30 / 128

Controls for the range

Symbols

The following symbols may appear on the display:

Symbol

Meaning



This symbol indicates that there is additional information and
advice about using the appliance. Select

to confirm the

information.

… 

This indicates that there are more menu options available, which
are not visible because there is not enough space on the display.



Alarm



Timer

      

Some settings, e.g., display brightness and signal tone volume,
are selected using a segment bar.



The system lock or sensor lock is on (see “Settings – Safety”).
The controls are locked.



Core temperature when using the probe



Remote control (only appears if you are in the Miele@home
system and have selected the

Remote Control

setting)



SuperVision (only appears if you are in the Miele@home system
and have selected the

SuperVision

SuperVision display

setting)

Summary of Contents for HR 1622-3 i

































































































































Search results

Summary of Contents for HR 1622-3 i

Reviews:

Related manuals for HR 1622-3 i

Brands by name

Popular brands

Miele HR 1622-3 i, Operating Instructions Manual

Search results

Summary of Contents for HR 1622-3 i

Reviews:

Related manuals for HR 1622-3 i

Brands by name

Popular brands