Miele HR 1622-3 i Operating Instructions Manual Download

Page: 85 / 128

Special Modes

Sabbath Program

The

Sabbath Program

and

Yom-Tov

Special Modes help to support religious
observance.

The oven heats up to the temperature
you have set and maintains this
temperature for a maximum of 24 hours
(

Sabbath Program

) or 76 hours (

Yom-Tov



Select

Special Modes





Select

Sabbath Program



Select the Special Mode you want.



Select the operating mode you want
to use.

You will not be able to start the
Special Mode if you have set a timer
or alarm.



Set the temperature.



Select

Start

The name of the Special Mode and the
set temperature will appear on the
display.

The oven heating will turn on around
30 seconds after you have closed the
door.

The oven interior lighting will remain on
during the entire cooking period.

Sabbath Program

Yom-Tov

and the set

temperature will appear permanently on
the display.

The time of day will not appear. The
proximity sensor will not respond, and
neither will any of the sensor buttons
(except for the



On/Off button).

The message

Do not open the door

will

appear.

After around 1 hour, this information will
turn off from time to time. You can open
the door when this message is

not

shown.



Place the food in the oven.

The

Sabbath Program

Special Mode ends

after 24 hours. The display will not
change.

In both Special Modes, the oven turns
off automatically after 76 hours.



If you want to end the Special Mode
prematurely, turn off the oven using
the



On/Off button.

Once a Special Mode has started, it
cannot be changed or saved under

Favorites

Summary of Contents for HR 1622-3 i

































































































































Search results

Summary of Contents for HR 1622-3 i

Reviews:

Related manuals for HR 1622-3 i

Brands by name

Popular brands

Miele HR 1622-3 i, Operating Instructions Manual

Search results

Summary of Contents for HR 1622-3 i

Reviews:

Related manuals for HR 1622-3 i

Brands by name

Popular brands