Miele HR 1622-3 i, Operating Instructions Manual

Page: 37 / 128

Features
37
Safety features of the induction
cooktop
Using the system lock
The system lock prevents the burners
from being turned on inadvertently.

Turn the burner control knobs of all
burners counterclockwise to
0 .
The system lock can only be activated
if all burners are turned off.

To activate the system lock , turn the
control knobs for the two front
burners all the way to the left at the
same time and hold them until

appears.
If a power level is selected when the
system lock is activated,

appears in
the display for a few seconds.
 To deactivate the system lock , turn
the control knobs for the two front
burners all the way to the left at the
same time and hold them until

goes out.
The system lock is deactivated if
there is a power failure.
Safety shut-off
The safety shut-off is triggered
automatically if a burner is heated for an
unusually long period of time. This time
depends on the power level selected. If
it has been exceeded, the burner
switches off and the residual heat
indicator appears. If you switch the
burner on and off again, it is ready for
operation again.
Residual heat indicator
If the switched-off burner is still hot, the
residual heat indicator appears in the
display. It only goes out when the
burners are cool enough to touch.
Pan/pan size recognition
The

symbol will flash in the burner
display of a burner that is turned on in
the following situations:
- There is no cookware on the burner.
- The base diameter of the cookware is
too small.
- The cookware is unsuitable.
The cookware is not recognized and the
burner turns off automatically after
3 minutes (see “Operating the induction
cooktop – How induction works”).
Using demo mode
The Demo mode can only be activated
for dealers if all burners are turned off.
This function enables the cooktop to
be demonstrated in showrooms
without heating up. Do not activate
this setting for domestic use.
 To activate demo mode , turn and
hold the burner control knob of the
front left burner counterclockwise.
 While holding the (front left) burner
control knob counterclockwise, turn
the burner control knob of the front
right burner briefly counterclockwise
twice and then hold it
counterclockwise until

appears in
the display.