![Miele H6260BP Operating And Installation Instructions Download Page 107](http://html.mh-extra.com/html/miele/h6260bp/h6260bp_operating-and-installation-instructions_236333107.webp)
Cleaning and care
107
Descaling the steam injection
system
When to run the descaling process
The frequency of descaling will depend
on the water hardness level in your
area.
The descaling process can be run at
any time.
However, to ensure that the oven
functions correctly, you will be
automatically prompted to run the
descaling process after a certain
number of programmes.
If Moisture Plus
is selected, a
prompt to run the descaling process will
appear in the display.
You can use the Moisture Plus
function 10 more times before
descaling. After the 10th programme,
the function will be locked and cannot
be used until descaling is carried out.
The prompt will disappear after a few
seconds. You can also dismiss it by
touching
OK
.
All other oven functions can still be
used.
The number of cooking processes
available until the function locks out will
count down in the display until
and
appear.
After that the Moisture Plus
function is locked and can only be used
again after the descaling process has
been carried out.
Descaling process sequence
Once the descaling process has been
started, it must be completed through
to the end. It cannot be cancelled.
The descaling cycle takes approx.
90 minutes and consists of several
steps:
Drawing in the descaling solution
Activation phase
Rinse 1
Rinse 2
Rinse 3
Evaporating residual moisture
Summary of Contents for H6260BP
Page 190: ......