Miele H 5961 B Operating And Installation Instructions Download

Page: 19 / 84

Miele@home enabled appliances send information via the household wiring
network

to the master appliance

about the operational status of the

appliances, as well as information about the progress of the programme.

These instructions are for a
communication enabled oven

that

can be linked into the Miele@home
system via a Miele@home installation kit
and a communication module

(optional accessories).

The Miele@home installation kit has
to be fitted by a Miele service
technician.

Information is displayed via:

– SuperVision appliance

The status of other appliances in the
system can be shown in the display
of the SuperVision appliance.

– InfoControl XIC 2100

Information transmitted from the
appliances can be displayed audibly
and visually in a mobile master unit in
the vicinity of the house.

You can use both of these at the same
time.

Optional accessories

– Required:

Miele@home installation kit + com-
munication module XKM 2000 SV

– Optional: Mobile master unit

InfoControl XIC 2100

Both of these are supplied with their
own installation and operating
instructions.

The home of the future

The Miele@home system is capable of
expansion. In the future,
communication enabled appliances

will be able to be operated via a PC or
a mobile phone.

Miele@home

Summary of Contents for H 5961 B





















































































Search results

Summary of Contents for H 5961 B

Reviews:

Related manuals for H 5961 B

Brands by name

Popular brands

Miele H 5961 B, Operating And Installation Instructions

Search results

Summary of Contents for H 5961 B

Reviews:

Related manuals for H 5961 B

Brands by name

Popular brands