Miele H 5961 B Operating And Installation Instructions Download

Page: 31 / 84

To use Automatic switch-off

switch a programme off

automatically

select Duration or Finish

and enter the time required.

Example:
The time is 11:45. Your dish will take
30 minutes to cook, and needs to be
ready at 12:15:00.

Select Duration, and enter 0:30 h, or
select Finish and enter 12:15.

The oven will switch off automatically at
the time set.

Delaying the start with Automatic
switch-off

We recommend using automatic
switching on and off when roasting.
However, do not delay the start for
too long when baking as the cake
mixture or dough will dry out, and
the raising agents will lose their
effectiveness.

switch a programme on and off

automatically

you have various

options:
– Enter the Duration and Finish time.
– Enter the Start time and the Duration.
– Enter the Start time and the Finish.

Example:
The time is 11:30. Your dish will take
30 minutes to cook, and needs to be
ready at 12:30.

Select Duration and enter 0:30 h.

Then select Finish and enter 12:30 h.

The Start time will be calculated
automatically. "Start at 12:00" will
appear in the display.

The cooking programme will start at this
time.

Operation

Summary of Contents for H 5961 B





















































































Search results

Summary of Contents for H 5961 B

Reviews:

Related manuals for H 5961 B

Brands by name

Popular brands

Miele H 5961 B, Operating And Installation Instructions

Search results

Summary of Contents for H 5961 B

Reviews:

Related manuals for H 5961 B

Brands by name

Popular brands