Miele H 5961 B Operating And Installation Instructions Download

Page: 66 / 84

To remove the back panel

Make sure the oven heating
elements are switched off and cool.
Danger of burning.

The back panel can be removed for
cleaning if necessary.

See "Cleaning and care" for information
on cleaning catalytic enamelled panels.

Remove the runners.

Loosen the screws in the back panel
and take it out.

The oven must not be used without
the back panel fitted. This could
cause considerable injury.

Reassemble in the reverse order

carefully ensuring all parts are correctly
in place.

To lower the top heat/grill
element

Make sure the oven heating
elements are switched off and cool.
Danger of burning.

Remove the runners.

Unscrew the wing nuts and lower the
top heating element.

Do not use force to pull it down as
this can cause the element to break.

Reassemble in the reverse order

carefully ensuring all parts are correctly
in place.

Make sure that the wing nuts are
tightened back up properly.

Cleaning and care

Summary of Contents for H 5961 B





















































































Search results

Summary of Contents for H 5961 B

Reviews:

Related manuals for H 5961 B

Brands by name

Popular brands

Miele H 5961 B, Operating And Installation Instructions

Search results

Summary of Contents for H 5961 B

Reviews:

Related manuals for H 5961 B

Brands by name

Popular brands