Miele H 5961 B Operating And Installation Instructions Download

Page: 29 / 84

Manual operation

If you do not want to use an Automatic
programme you can enter the settings
for a cooking programme manually.

Place the food in the oven.

Switch the oven on with the

sensor.

Select the required function and set
the temperature.

The oven will start heating, and the
cooling fans will switch on.

At the end of the cooking programme:

Switch the oven off and remove the
food.

Cooling fans

The cooling fans will continue to run for
a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the control
panel or in the oven housing unit.

The fans are temperature controlled,
and will switch off automatically.

You can change this standard default
setting, see "Settings - Cooling fan run-
on".

Change

Selecting "Change" brings up all the
options which can be changed, e.g. the
selected temperature.

Selecting a function

Switch the oven on.

Select the function required.

After selecting an oven function,
options which can be entered or
changed for the cooking programme
will appear in the display, e.g.:

Temperature

Duration

Start time

Finish

Heating-up phase
(only with Fan plus, Auto roast and
Conventional heat)

Moisture reduction

Change function

Operation

Summary of Contents for H 5961 B





















































































Search results

Summary of Contents for H 5961 B

Reviews:

Related manuals for H 5961 B

Brands by name

Popular brands

Miele H 5961 B, Operating And Installation Instructions

Search results

Summary of Contents for H 5961 B

Reviews:

Related manuals for H 5961 B

Brands by name

Popular brands