Miele H 5081 BP Operating And Installation Manual Download

Page: 38 / 84

Up to 25 frequently used recipes can be
saved under a user-defined name, and
then called up again as required.

Either

– Select the

Save as

option at the end

of running an Automatic programme
and give the programme a name of
your choice, or

– select the

User programmes menu

You can combine up to four cooking
steps and save them under a name
of your choice.

The User programmes menu

If user programmes have already been
created and saved, the following will
appear:

Select

For calling up and starting an
existing User programme.
You choose whether the programme
should "Start now" or "Start later".

Create

This is used to create a new User
programme.

Change

For altering an existing programme.

Delete

Existing programmes can be deleted
individually.
You can also delete all User
programmes at the same time - see
"Settings - Factory default - User
programmes".

Use in main menu

You can place up to three user
programmes in the Main menu.
Changes to the Main menu can be
reset via "Settings - Default settings -
Main menu".

User programmes

Summary of Contents for H 5081 BP





















































































Search results

Summary of Contents for H 5081 BP

Reviews:

Related manuals for H 5081 BP

Brands by name

Popular brands

Miele H 5081 BP, Operating And Installation Manual

Search results

Summary of Contents for H 5081 BP

Reviews:

Related manuals for H 5081 BP

Brands by name

Popular brands