Miele H 5081 BP Operating And Installation Manual Download

Page: 22 / 84

The appliance is operated via the display

and the electronic sensors next to

and below the display. These react to finger contact. A keypad tone will sound
each time a sensor is touched. The volume of the keypad tone can be adjusted or
switched off altogether (see "Settings - Volume - Keypad tone").

Sensors

Meaning

Sensors
When the appliance is switched on, the allocations for these sensors
appear in the display.

Sensors which can be used in a programme are lit up.

0–9

Numerical keypad
This lights up if there is the option to enter a temperature or cooking
duration.

ON/OFF sensor
For switching the appliance on and off.

Clear sensor
To delete the latest entry.

Minute minder (egg timer) sensor
For entering a time for the minute minder, e.g. for boiling eggs.

Controls

Summary of Contents for H 5081 BP





















































































Search results

Summary of Contents for H 5081 BP

Reviews:

Related manuals for H 5081 BP

Brands by name

Popular brands

Miele H 5081 BP, Operating And Installation Manual

Search results

Summary of Contents for H 5081 BP

Reviews:

Related manuals for H 5081 BP

Brands by name

Popular brands