Miele H 5081 BP Page 54 Operating And Installation Manual Download

Page: 54 / 84

Units

Temperature

°C
(Factory default)

°F

Showroom programme

Off
(Factory default)

Demo programme

Continuous loop

Demo mode

This programme is for dealers who
want to demonstrate the appliance
without the heater elements working.

Do not activate this setting for domestic
use!

If you select and activate this option by
mistake, you can deactivate it as
follows:

– Demo programme

Select the "Off" option and follow the
instructions in the display.

– Continuous loop

– Demo mode

Touch one of the sensors next to the
display and follow the instructions.

Factory default

All settings

Any settings that you have altered
will be reset to the factory default
setting.

User programmes

All saved user programmes will be
deleted.

Main menu

The main menu will be reset to the
factory default setting.

Recommended temperatures

Only those recommended
temperatures which have been
changed will be reset to the factory
default settings.

Settings

Summary of Contents for H 5081 BP





















































































Search results

Summary of Contents for H 5081 BP

Reviews:

Related manuals for H 5081 BP

Brands by name

Popular brands

Miele H 5081 BP, Operating And Installation Manual

Search results

Summary of Contents for H 5081 BP

Reviews:

Related manuals for H 5081 BP

Brands by name

Popular brands