Miele H 5081 BP Operating And Installation Manual Download | Manualshive

Page: 18 / 84

background image

FlexiClip telescopic runners

The FlexiClip telescopic runners can be
clipped into any of the existing shelf
runners and pulled out of the oven to
their fullest extent.

Push the telescopic runners right in
before placing a tray or rack on
them.

To prevent the risk of a rack or tray
sliding off the runners, make sure that
they are sitting securely on their
runners in between the stoppers at
either end of each runner.

The Flexi-clip runners can can support
a maximum load of 15 kg.

Fitting the FlexiClip telescopic runners

Make sure that the oven has cooled
down before moving the FlexiClip
runners.
Take care not to burn yourself on
them.

The FlexiClip runners are fitted in between
the two rails that make up a shelf level.
The telescopic runner with the Miele
logo is fitted on the right.

When fitting the FlexiClip runners

do

not

extend them.

^

Fit the FlexiClip runner in between the
two rails at the front (1) and then push
it into the oven compartment (2).

^

Then secure the FlexiClip runner to
the bottom of the two rails as
illustrated (3).

If the FlexiClip runners are difficult to
pull out after fitting, you may need to
pull firmly on them once to release
them.

Features

18

«
...
16
17
18
19
20
...
»

Summary of Contents for H 5081 BP





















































































Reviews:

No comments

Related manuals for H 5081 BP

Profile Advantium SCB2001CSS

Brand: GE Pages: 3

Brand: Amica Pages: 68

Brand: Viking Pages: 10

Brand: NEFF Pages: 116

B87VS38 0B Series

Brand: NEFF Pages: 60

Brand: Daewoo Pages: 30

Brand: Caso Pages: 179

Brand: Hansa Pages: 20

Discovery iQ DYO130PB

Brand: Dacor Pages: 52

Brand: Zline Pages: 39

Brand: MBM Pages: 83

Brand: Leonard Pages: 44

Brand: Sandstrom Pages: 208

Brand: Daewoo Pages: 27

Brand: IKEA Pages: 12

Brand: Culina Pages: 16

Brand: Goddess Pages: 40

Brand: Küppersbusch Pages: 112

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands