After the cooking programme has
finished
– The cooling fan will continue to run
for a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the
control panel or in the oven housing
unit.
The fan is sensor-controlled and will
switch off automatically. You can
change the default setting for this
(see "Settings - Cooling fan run-on").
– To save energy, the oven will switch
off automatically if it is not used
again within a certain time.
The timing depends on the settings
selected (cooking function,
temperature, duration).
Changing or deleting an entered
cooking time
Selecting "Change" brings up all the
options which can be changed.
^
Select the option you want and
change it.
Use the
U
sensor to delete the entered
times.
If there is a power cut, all data entered
will be deleted.
Changing the heating-up
phase
With the Fan plus, Auto roast and
Conventional heat functions, the
Heating-up phase will appear with the
following options:
ß
Rapid
(Factory default)
The top heating/grill elements, the
ring element and the fan are
switched on at the same time so that
the oven reaches the desired
temperature as quickly as possible.
R
shows in the display.
ß
Normal
Only the heating elements required
for the cooking function selected are
switched on; see "Functions".
3
shows in the display.
The Rapid heat-up phase should not
be used for some items such as
pizza, biscuits and small cakes
because they will brown too quickly
from the top.
To switch off Rapid heat-up
– For one cooking programme:
Select "Heating-up phase", then
"Normal".
Rapid heat-up is also switched off if
a temperature of less than 100 °C is
set.
– In general:
See "Settings - Heating-up phase".
More about manual operation
35
Summary of Contents for H 5081 BP
Page 2: ...2 ...
Page 83: ...83 ...
Page 84: ...Alteration rights reserved 22 4411 H 5081 BP M Nr 09 270 260 01 ...
