Guide to the appliance
20
Display functions
The display is used to select or set the
following:
- the programme
- the options
- the timer
- the
Settings
The display can show the following:
- the programme name
- the programme stage
- the estimated time left for the
programme to run
- the energy and water consumption
(EcoFeedback)
- any relevant fault messages and
information
To save energy, the dishwasher
switches off after a few minutes if you
do not touch any sensors during this
time.
Touch the
sensor to switch the
dishwasher back on.
The sensors on the control panel and in
the display react to fingertip contact.
The touch display can be scratched
by pointed or sharp objects, e.g.
pens.
Only touch the display with your
fingers.
Touch the required menu option to
select it.
The currently selected setting is marked
orange and can be changed.
The
OK
sensor in the display is used to
confirm a message or setting and to
move to another menu level.
To exit a submenu use the
sensor.
Touch the
sensor at any time to
return to the Programmes menu.
If you do not touch any sensors for
several seconds, the display will revert
to the previous menu. You will then
have to enter your settings again.
Summary of Contents for G 7969
Page 63: ...Loading the dishwasher 63 Cutlery tray ...
Page 65: ...Comparison tests 65 Capacity 15 ...
Page 66: ...Comparison tests 66 ...