![background image](http://html.mh-extra.com/html/miele/g-7969/g-7969_operating-instructions-manual_234842031.webp)
Using for the first time
31
Replenishing salt
When
Add salt and run the
“QuickPowerWash” programme with the
“Express” option without a load
appears
in the display wait until the end of the
programme and then refill the salt
reservoir.
Confirm with
OK
.
The salt refill indicator will go out.
Risk of corrosion due to saline
solution.
Saline solution that runs out can
cause corrosion in the wash cabinet
and to the dishwasher load.
Each time you have opened the salt
container lid, immediately run the
65 °C
QuickPowerWash
programme
with the
Express
option and
without any dishes. This will dissolve
and remove any traces of salt from
the wash cabinet.
After the salt reservoir has been filled,
the refill reminder may still appear in the
display if the salt concentration has not
yet reached the correct level. If this is
the case, confirm with
OK
again.
The salt refill indicator is deactivated if
the dishwasher is set to a water
hardness below 0.9 mmol/l (5 °dH -
German scale).
Summary of Contents for G 7969
Page 63: ...Loading the dishwasher 63 Cutlery tray ...
Page 65: ...Comparison tests 65 Capacity 15 ...
Page 66: ...Comparison tests 66 ...