Miele G 7969 Operating Instructions Manual Download Page 35

Page: 35 / 128

Settings

Language



The display can be set to appear in one
of several different languages.

You can change the language used in
the display and also the country via the

Language 

submenu.

The flag after the word

Language 

serves as a guide if a language that
you do not understand has been set.
In this case keep selecting the menu
option that has a flag after it until you
reach the

Language 

submenu.

Time

The current time of day must be set
before you can use the timer option.

Setting the clock format

You can select either a 24-hour or 12-
hour clock.



Select the setting you want for the
clock format.

Setting the time of day

You can set the current time.



Set the hour and the minutes and
confirm both with

The time of day has now been saved.

If connection is established to a Wi-Fi
network, the time of day is set
automatically.

Summary of Contents for G 7969

































































































































Search results

Summary of Contents for G 7969

Reviews:

Related manuals for G 7969

Brands by name

Popular brands

Miele G 7969, Operating Instructions Manual

Search results

Summary of Contents for G 7969

Reviews:

Related manuals for G 7969

Brands by name

Popular brands