Operation
78
Interrupting a programme
A programme will be interrupted as
soon as the door is opened.
If the door is closed again, the
programme will continue from the point
it was at before the door was opened.
Risk of scalding due to hot
water.
During operation, water in the
dishwasher may be very hot.
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before
closing the door again, leave it ajar
for approx. 20 seconds. This will
enable the temperature in the wash
cabinet to settle.
Cancelling or changing a
programme
If a programme is cancelled,
important programme stages may be
missed.
A programme should only be
cancelled in the first few minutes of
the programme sequence.
If a programme has already started and
you wish to cancel it, proceed as
follows:
Open the door.
Touch the
(Back) sensor.
Confirm the query
Cancel the
programme?
with
Yes
.
The programme is cancelled.
If you would like to select another
programme:
Touch the
sensor.
The display will change back to the
"Programmes" menu.
If you have dispensed detergent
manually, check whether the
detergent compartment is still closed.
If the lid is already open, fill it with
detergent again and close the lid.
Select the programme you want, and
then start it by closing the door.
The in-operation indicator light comes
on to show that a programme has been
started.
Summary of Contents for G 7969
Page 63: ...Loading the dishwasher 63 Cutlery tray ...
Page 65: ...Comparison tests 65 Capacity 15 ...
Page 66: ...Comparison tests 66 ...
