Miele G 7969 Operating Instructions Manual Download Page 43

Page: 43 / 128

Settings

Setting the electricity tariff times

Before you can use the

EcoStart

option,

you must set at least one electricity
tariff time.



Select an energy tariff time from T1 to
T3 that you want to set.

The start of the energy tariff time
selected will be displayed.



Set the hour and minutes for the start
time.



Select

Finish

The end of the energy tariff time
selected will be displayed.



Set the hour and minutes for the
finish time and confirm both with

The energy tariff time will be saved.

You can now select the priority of the
saved energy tariff time.



Select the priority you want.

The selected settings are displayed.

The electricity tariff time will be
activated.

Changing the electricity tariff times

You can change the start, finish, or
priority of an electricity tariff time.



Select an energy tariff time from T1 to
T3 that you want to change.



Select the setting you want to
change.



Change the setting and confirm with

The selected settings are displayed.

The change will be saved.

Summary of Contents for G 7969

































































































































Search results

Summary of Contents for G 7969

Reviews:

Related manuals for G 7969

Brands by name

Popular brands

Miele G 7969, Operating Instructions Manual

Search results

Summary of Contents for G 7969

Reviews:

Related manuals for G 7969

Brands by name

Popular brands