Settings
41
Running a RemoteUpdate
Information about the content and
scope of a RemoteUpdate will be
provided in the Miele app.
A message will appear in your
dishwasher display if a software update
is available.
You can install the update immediately
or postpone it until later. When the
appliance is switched on again, you will
be reminded about the update.
Switch RemoteUpdate off if you do not
wish to install updates.
Updates may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch the dishwasher off
during the update. Otherwise, the
update will be aborted and will not be
installed.
- Some software updates can only be
carried out by your Miele dealer.
Consumption (EcoFeedback)
You can set whether the energy and
water consumption is displayed for the
selected programme. This function
shows the estimated consumption
before a programme, and the actual
consumption after the end of the
programme.
In this menu you can also call up the
total consumption of energy and water
for all the wash programmes you have
previously run on your dishwasher (see
“Caring for the environment” chapter,
“EcoFeedback consumption ”display
section).
Display Consumption
Select the
Consumption display
menu
option and confirm with
OK
.
Select the setting you want and
confirm with
OK
.
Display Total consumption
Select the
Total consumption
menu
option and confirm with
OK
.
You can display the values for
Energy
and
Water
using the
buttons.
You can also reset the values for the
total consumption to 0.
Select the
Reset
menu option and
confirm with
OK
.
Select the
Yes
menu option and
confirm with
OK
.
Confirm the message with
OK
.
The values are now reset to 0.
