Miele G 5481 Operating Instructions Manual Download Page 45

Page: 45 / 92

Operation

Switching on the dishwasher



Turn on the tap if it is turned off.



Open the door.



Make sure the spray arms can rotate
freely.



Press the



button.

The indicator light for the selected
programme will come on.

Selecting a programme

Choose your programme according to
the type of crockery and the degree of
soiling.

The different programmes and their use
are described in the

“Programme

chart”



Use the programme selection
button



to select the programme

you want.

The indicator light for the selected
programme will come on.
The programme duration will appear in
hours and minutes in the display.

You can now select programme options
(see “Programme options”).

If any programme options are selected,
the appropriate indicator lights will also
light up.

Summary of Contents for G 5481





























































































Search results

Summary of Contents for G 5481

Reviews:

Related manuals for G 5481

Brands by name

Popular brands

Miele G 5481, Operating Instructions Manual

Search results

Summary of Contents for G 5481

Reviews:

Related manuals for G 5481

Brands by name

Popular brands