Miele G 5050 Operating Instructions Manual Download Page 58

Page: 58 / 92

Programme options

Extra dry

You can select this programme option
in order to increase the programme dry-
ing performance.

If you activate this programme option,
the programme running times and final
rinse temperatures will increase. The
energy consumption may increase.



Open the door.



Switch the dishwasher off with the



button, if it is switched on.



Press the



button in and,

whilst

holding it in

, switch the dishwasher

on using the



button.

Keep the



button pressed in for at

least 4 seconds until the



indicator

light comes on.

If this does not happen, start the pro-
cedure from the beginning again.



Press the



programme selection

button 11 times.

The top left programme indicator light
will emit 1 long flash and 1 short flash
at intervals.

The flashing sequence in the display in-
dicates whether the Extra dry pro-
gramme option is activated or not:

 

: Extra dry is activated

 

: Extra dry is deactivated



Press the



button to change the

setting.

The setting is now saved.



Switch the dishwasher off with the



button.

Summary of Contents for G 5050





























































































Search results

Summary of Contents for G 5050

Reviews:

Related manuals for G 5050

Brands by name

Popular brands

Miele G 5050, Operating Instructions Manual

Search results

Summary of Contents for G 5050

Reviews:

Related manuals for G 5050

Brands by name

Popular brands