Miele G 5050 Operating Instructions Manual Download Page 54

Page: 54 / 92

Programme options

Express



The



Express

programme option re-

duces the programme running time.

In order to achieve optimum cleaning
results, the temperature, and therefore
the energy consumption, will increase
with this option.

The time by which the programme run-
ning time is shortened varies according
to the selected programme.

Selecting the



Express

programme

option may take precedence over other
selected options.

When used in combination with the

QuickPowerWash

programme, the



Express

option results in a rinse

cycle designed solely for the purpose
of flushing out the cabinet to remove
salt solution that leaked out after re-
filling the salt reservoir.



Open the door.



Switch the dishwasher on with the



button.

The indicator light for the programme
selected will flash.



Select a different programme if re-
quired.



Press the



Express

button.

The



Express

indicator light will come

on if the programme option is available
for the programme selected.



Start the programme by closing the
door.

The selected programme option will re-
main active for that particular pro-
gramme until the setting is changed (ex-
cept for the

ECO

programme).

Summary of Contents for G 5050





























































































Search results

Summary of Contents for G 5050

Reviews:

Related manuals for G 5050

Brands by name

Popular brands

Miele G 5050, Operating Instructions Manual

Search results

Summary of Contents for G 5050

Reviews:

Related manuals for G 5050

Brands by name

Popular brands