Programme options
55
Buzzers
A buzzer sequence will sound at the
end of the programme or if there is a
fault.
The buzzers at the end of a programme
and the alarm tone in the event of a
fault will sound 4 times at intervals with
a short pause between each set.
The buzzers are switched off as stand-
ard.
You can switch on the buzzers that
sound at the end of a programme if you
wish. The alarm tone that sounds in the
event of a fault is always switched on.
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the
button in and,
whilst
holding it in
, switch the dishwasher
on using the
button.
Keep the
button pressed in for at
least 4 seconds until the
indicator
light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Press the
programme selection
button 4 times.
The top left programme indicator light
will flash rapidly 4 times at intervals.
The flashing sequence in the display
shows whether the buzzers at the end
of the programme are activated or de-
activated:
-
: Buzzers activated
-
: Buzzers deactivated
Press the
button to change the
setting.
The setting is now saved.
Switch the dishwasher off with the
button.
Summary of Contents for G 5050
