Miele G 5050 Operating Instructions Manual Download Page 57

Page: 57 / 92

Programme options

Extra clean

You can choose this programme option
to increase the cleaning performance of
the programmes.

If you activate this programme option,
the programme running times and the
main wash temperatures will increase.
The water and energy consumption
may increase.



Open the door.



Switch the dishwasher off with the



button, if it is switched on.



Press the



button in and,

whilst

holding it in

, switch the dishwasher

on using the



button.

Keep the



button pressed in for at

least 4 seconds until the



indicator

light comes on.

If this does not happen, start the pro-
cedure from the beginning again.



Press the



programme selection

button 10 times.

The top left programme indicator light
will emit 1 long flash at intervals.

The flashing sequence in the display in-
dicates whether the Extra clean pro-
gramme option is activated or not:

 

: Extra clean is activated

 

: Extra clean is deactivated



Press the



button to change the

setting.

The setting is now saved.



Switch the dishwasher off with the



button.

Summary of Contents for G 5050





























































































Search results

Summary of Contents for G 5050

Reviews:

Related manuals for G 5050

Brands by name

Popular brands

Miele G 5050, Operating Instructions Manual

Search results

Summary of Contents for G 5050

Reviews:

Related manuals for G 5050

Brands by name

Popular brands