Miele G 5050, Operating Instructions Manual

Page: 26 / 92

Before using for the first time
26
Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6 ml.
3 ml is the factory default setting.
The rinse aid dosage can turn out to be
higher than the set value due to the
automatic adjustment of the pro-
gramme.
If spots appear on crockery and glass-
ware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
- Decrease the rinse aid dosage.
 Open the door.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the  button in and, whilst
holding it in , switch the dishwasher
on using the

button.
Keep the  button pressed in for at
least 4 seconds until the  indicator
light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
 Press the  programme selection
button 3 times.
The top left indicator light will flash rap-
idly 3 times at intervals.
The dosage set will appear in the time
display after

.
  will start flashing in the time display.
Setting 3 is set.

Use the

button to select the re-
quired setting.
The dosage amount increases each
time you press the button. When the
highest value is reached, the setting
starts again from the beginning.
The setting is now saved.
 Switch the dishwasher off with the 
button.