![background image](http://html.mh-extra.com/html/miele/g-5050/g-5050_operating-instructions-manual_234690020.webp)
Before using for the first time
20
Displaying and setting the water
hardness
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the
button in and,
whilst
holding it in
, switch the dishwasher
on using the
button.
Keep the
button pressed in for at
least 4 seconds until the
indicator
light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Press the
programme selection
button 2 times.
The top left indicator light will flash rap-
idly 2 times at intervals.
The value set for the water hardness is
shown as a figure after
in the time dis-
play.
4
will start flashing in the time dis-
play.
A water hardness of 14 °dH is set.
Use the
button to set the water
hardness value in your area.
The dosage amount increases each
time you press the button. When the
highest value is reached, the setting
starts again from the beginning.
The setting is now saved.
Switch the dishwasher off with the
button.
Summary of Contents for G 5050
