Miele G 5050 Operating Instructions Manual Download Page 56

Page: 56 / 92

Programme options

Switching off the refill remind-
ers

If you only ever use combination deter-
gent products containing salt and rinse
aid in your dishwasher, you can switch
off both refill reminders if you wish.



Open the door.



Switch the dishwasher off with the



button, if it is switched on.



Press the



button in and,

whilst

holding it in

, switch the dishwasher

on using the



button.

Keep the



button pressed in for at

least 4 seconds until the



indicator

light comes on.

If this does not happen, start the pro-
cedure from the beginning again.



Press the



programme selection

button 9 times.

The top left programme indicator light
will flash rapidly 9 times at intervals.

The flashing sequence in the display in-
dicates whether the refill reminders
have been activated or not:

 

: Refill reminders activated

 

: Refill reminders deactivated



Press the



button to change the

setting.

The setting is now saved.



Switch the dishwasher off with the



button.

Please make sure that if you stop us-
ing combination detergents, you refill
the dishwasher salt and rinse aid.
Switch the refill reminders back on.

Summary of Contents for G 5050





























































































Search results

Summary of Contents for G 5050

Reviews:

Related manuals for G 5050

Brands by name

Popular brands

Miele G 5050, Operating Instructions Manual

Search results

Summary of Contents for G 5050

Reviews:

Related manuals for G 5050

Brands by name

Popular brands