Problem
Possible cause
Remedy
Detergent residue is left
in the dispenser at the
end of a programme.
The dispenser was
still damp when
detergent was
added.
Make sure the dispenser is
dry before adding detergent.
The detergent lid cannot
be closed properly.
Clogged detergent
residue is blocking
the catch.
Clean the detergent from the
catch.
At the end of a
programme there is a
film of moisture on the
inside of the door and
the interior walls.
This is caused by the
drying system and
does not indicate a
fault.
The moisture will dissipate
after a short while.
Water remains in the
wash cabinet at the end
of a programme.
Before rectifying the problem
you must:
–
Switch the dishwasher off
with the On/Off button
s
.
The filter combination
in the wash cabinet is
clogged.
Clean the filter combination.
See "Cleaning and care".
The drain pump or
non-return valve may
be blocked.
Clean the drain pump or the
non-return valve. See
"Problem solving".
The drain hose is
kinked.
Remove any kink from the
drain hose.
Problem solving guide
50
