Miele G 1730 Operating Instructions Manual Download Page 34

Page: 34 / 80

Selecting an Extra

You can now select Extras for the
programme selected.

To do this, confirm the highlighted

Extras

option by pressing the OK

button.

The Extras available for the programme
selected will appear in the display.

The Extras are:

Pre-wash:

– For removing loose soiling.

Soak:

– For soaking and softening dried on

soiling.
If you are using powder dishwasher
detergent, add approx. 5 g to
compartment I.

Longer drying:

– For improved drying of awkwardly

shaped dishes and also plastic
items.

Back

Longer drying

Select the Extra you want and
confirm with the OK button.

A tick

will appear beside the Extra to

show that it has been set.

The display will change back to the
programme menu.

Repeat the process if you want to
select more than one Extra for a
programme (where available).

To cancel the selection of an Extra,
confirm it again with the OK button.

Operation

Summary of Contents for G 1730

















































































Search results

Summary of Contents for G 1730

Reviews:

Related manuals for G 1730

Brands by name

Popular brands

Miele G 1730, Operating Instructions Manual

Search results

Summary of Contents for G 1730

Reviews:

Related manuals for G 1730

Brands by name

Popular brands