Do not fill the salt reservoir with
water.
^
Add salt only until the reservoir is full
or until water runs out of the opening.
The salt reservoir holds approx. 1 kg
of salt depending on the brand used.
Do not add any more than 1 kg of
salt.
As the salt reservoir is filled, displaced
water may overflow.
^
Clean any excess salt from around
the reservoir opening and then close
the flap.
^
Run the Quick wash programme
immediately (without any crockery in
the dishwasher) to remove any traces
of salt water from the cabinet.
"Insufficient salt" message
^
Fill the salt reservoir with dishwasher
salt for reactivation when the
k
Replenish salt
message appears.
(If it appears during a programme,
wait until the end of the programme).
^
Confirm by pressing the OK button.
The "Insufficient salt" message will go
out.
After the salt reservoir has been filled,
the "Replenish salt" message may still
appear in the display if the salt
concentration has not yet reached the
correct level.
If this is the case, press the OK button
again.
,
After filling the salt reservoir, run
the Quick wash programme immedi-
ately (without any crockery in the
dishwasher) to remove any traces of
salt water from the cabinet.
Before using for the first time
17
