Miele G 1730 Operating Instructions Manual Download Page 39

Page: 39 / 80

Press the Start button.

Sensor wash

Start at:

20:00

Cancel

The programme name and the start
time will appear in the display.
The "Start" indicator light and

will

light up.

When the set time is reached, the
programme selected will begin
automatically. The

indicator light will

go out.

To prevent children coming into

contact with dishwasher detergent
do not fill the detergent dispenser

until just before starting the
programme

, i.e. before pressing the

Start button and activate the child
safety lock.

Starting a programme before the
start time has been reached:

You can start a programme before the
set start time has been reached.
Proceed as follows:

Select

Cancel

and confirm with the

OK button.

The

indicator light will go out. The

programme selection menu will appear
and the Start indicator light will flash.

Select the programme you want and
press the Start button.

The programme cycle will begin.
The Start indicator light will come on.

Operation

Summary of Contents for G 1730

















































































Search results

Summary of Contents for G 1730

Reviews:

Related manuals for G 1730

Brands by name

Popular brands

Miele G 1730, Operating Instructions Manual

Search results

Summary of Contents for G 1730

Reviews:

Related manuals for G 1730

Brands by name

Popular brands