background image

Programme

When to use

Sensor wash

Sensor controlled programme
for

normally soiled

crockery

Quick wash

o

40 °C

Quick wash programme for

lightly soiled

items, e.g. party crockery;

flushing out salt residues after replenishing salt;
includes the sensor controlled glass care system;
Tabs are not suitable for use with this programme.

Sensor wash
gentle

:

Sensor controlled "Glass care" programme
for

lightly soiled heat-sensitive

glassware and crockery;

use 50% less detergent than required for a full load

Energy save

o

1)

for

normally soiled

crockery.

Energy saving programme using low temperatures and a longer wash duration;
includes sensor controlled glass care system

Normal 55 °C

o

for

normally soiled

crockery

with

dried on

soiling; includes sensor controlled glass care system

Intensive 65 °C

for

heavily soiled

crockery with

dried on soiling containing starch.

Pots & pans
75 °C

for

normally soiled pots, pans, and utensils

with

dried on

soiling;

also suitable for heavily soiled crockery, use 20% more detergent than
recommended for a full load

Without heater

o

Only for use with hot water connection of at least 45 °C/115 °F;
for

lightly to normally soiled

crockery;

includes sensor controlled glass care system

Pre-wash

for rinsing crockery to avoid smells, if a complete cycle is not yet needed

Water save

o

for

lightly to normally soiled

crockery where soiling has not dried on;

this programme uses

water sparingly

;

includes the sensor-controlled glass care system

1) Standard programme for energy labelling.
2) See "Operation, Display".

Programme chart

58

Summary of Contents for G 1730

















































































Reviews: