Miele G 1730 Operating Instructions Manual Download Page 77

Page: 77 / 80

Miele

{

home

(the appliance must first be fitted with
the Miele

home Communication

module)

This communication enabled
dishwasher can transmit programme
data through the power lines to the
Miele

home system. The dishwasher

must be signed on to the Miele

home

system.

Please read the separate operating
instructions supplied with the
Miele

home system before you sign

on the dishwasher.

Signing on

Miele

home

Sign on?

Back

Press the OK button to confirm that
the dishwasher should be signed on
to the Miele

home system.

The signing on process will begin.

Signing on. Please wait.

Cancel

You can cancel the signing on process
with

Cancel

Confirm the messages in the display
with the OK button.

Sign on is complete.

If signing on is unsuccessful:

Check that the Miele

home system

is active.

Activate the signing on of a new
appliance on the Miele

home

system.

Repeat the signing on process on the
dishwasher.

Signing off

You can sign off the dishwasher if you
no longer want the programme data to
be transmitted.

Select the option to sign off from
Miele

home and confirm with the OK

button.

Settings menu

Summary of Contents for G 1730

















































































Search results

Summary of Contents for G 1730

Reviews:

Related manuals for G 1730

Brands by name

Popular brands

Miele G 1730, Operating Instructions Manual

Search results

Summary of Contents for G 1730

Reviews:

Related manuals for G 1730

Brands by name

Popular brands