Operating the Ice/Water dispenser
99
Switching the Dispenser
unit
on
Ice cubes can only be made when the
ice cube container is completely
closed.
In Settings mode
, use the
and
sensors to select
Dispenser unit
and touch
OK
to confirm your
selection.
Use the
and
sensors to select
On
and confirm your selection with
OK
.
Close the appliance door.
The Ice/Water dispenser is now ready
for operation.
All sensors in the Ice/Water dispenser
control panel should now be highlighted
in white.
If this is not the case, the system lock
has been activated (the
sensor will
be highlighted in white, see “Operating
the Ice/Water dispenser – Switching the
system lock on/off”).
Once the freezer has cooled down to its
set temperature, the ice cube maker will
fill with water.
As soon as the water is frozen, ice
cubes will fall out of the ice cube maker
into the ice cube container.
Ice cube production is halted
automatically when the ice cube
container is full.
After the Ice/Water dispenser has
been switched on, it can take up to
24 hours until the first serving of ice
cubes is ready.
After the appliance door has been
opened and closed, it can take several
seconds until the Ice/Water dispenser
is ready for operation and the sensors
can be operated again.
Summary of Contents for F 2671 Vi
Page 22: ...Installation INSTALLATION 22 30 mm 22 mm 262 mm 102 mm 102 mm 85 mm Side view ...
Page 124: ......
Page 125: ......
Page 126: ......
