manualshive.com logo in svg

Miele F 2671 Vi, Operating And Installation Instructions

Share
Download
Miele F 2671 Vi Operating And Installation Instructions Download Page 72

Selecting further settings

72

Switching 

Eco mode

 

 on or

off

Eco mode

 is useful when going on a

holiday, for example, if you do not wish
to switch off the appliance completely
or do not need a high degree of cooling.
Energy consumption in 

Eco mode

 is

lower than in normal operation.

The freezer is regulated to a
temperature of -16 °C.

If the SuperFreeze function 

 is

switched on, it will be switched off
when 

Eco mode

 is selected.

In Settings mode 

, use the 

and 

 sensors to select 

Eco mode

and touch 

OK

 to confirm your

selection.

Use the 

 and 

 sensors to switch

Eco mode

 

On

 or 

Off

 and confirm your

selection with 

OK

.

Only the changed temperature in the
display indicates that 

Eco mode

 is

switched on.

Useful tip: 

You can also switch off the

Eco mode

 function by directly adjusting

the temperature 

 (see "The correct

temperature - Setting the temperature").

Health risk due to consumption

of spoiled food.
The shelf life and quality of food may
be affected if the temperature
remains above -18 °C for an
extended period.
Only ever switch on the 

Eco mode

function for a limited period.
When switching to 

Eco mode

, ensure

that the food in the freezer is already
properly frozen.
Do not freeze any new food while the

Eco mode

 function is switched on.

Summary of Contents for F 2671 Vi

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands