manualshive.com logo in svg

Miele F 2671 Vi, Operating And Installation Instructions

Share
Download
Miele F 2671 Vi Operating And Installation Instructions Download Page 108

Cleaning and care

108

6

.

Turn the cap of the filter cartridge

clockwise

 as far as the marker 6.

Risk of damage caused by water

running out.
If the filter cartridge is not fitted
correctly, there is a risk of water
leaking out of the appliance.
When fitting the filter cartridge, be
sure to turn it as far as the marker.

Once the IntensiveClear mesh filter has
been cleaned, the water filter display 

must be reset via the Settings mode 

in the display (see “Selecting further
settings - Resetting the 

Water filter

display

 

”).

After cleaning

Refit all shelves and accessories in
the appliance.

Reconnect to the power supply and
switch the appliance back on.

Switch the SuperFreeze 

 function

on for a while so that the freezer can
cool down quickly.

Once the freezer has reached the
required temperature, place the
frozen food back in the freezer
baskets.

Switch the SuperFreeze 

 function

off as soon as the temperature in the
freezer is a constant -18 °C or colder.

Summary of Contents for F 2671 Vi

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands