manualshive.com logo in svg

Miele F 2671 Vi, Operating And Installation Instructions

Share
Download
Miele F 2671 Vi Operating And Installation Instructions Download Page 84

Selecting further settings

84

Switching off the Ice/Water dispenser
lighting 

The Ice/Water dispenser lighting is
switched off completely.

In Settings mode 

, use the 

and 

 sensors to select 

Dispenser

lighting

 and touch 

OK

 to confirm your

selection.

Use the 

 and 

 sensors to select

Mode

 and confirm your selection with

OK

.

Use the 

 and 

 sensors to select

Off

 and confirm your selection with

OK

.

Touch the 

 sensor to return to the

main screen.

Switching Sabbath mode 

 on

or off

The refrigeration appliance has a

Sabbath mode

 to support the observance

of religious customs.

When 

Sabbath mode

 is switched on,

you cannot configure any settings on
your refrigeration appliance.

Ensure that the appliance door is
properly closed, as visual and audible
alarms are switched off in 

Sabbath

mode

.

In Settings mode 

, use the 

and 

 sensors to select 

Sabbath mode

and touch 

OK

 to confirm your

selection.

Use the 

 and 

 sensors to select

On

 or 

Off

 and confirm your selection

with 

OK

.

When 

Sabbath mode

 is switched on,

 will appear in the display and the

display brightness will be reduced (the
display does not change when the
appliance door is closed).

When 

Sabbath mode

 

 is switched on,

the following functions are switched off:

– the Door assistant

(with furniture fronts without handles,
the appliance door will have to be
pulled from the bottom or side)

– the lighting

– all acoustic and visual signals

– the temperature display

– the SuperFreeze function 

(if previously switched on)

Summary of Contents for F 2671 Vi

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands