Miele F 2671 Vi, Operating And Installation Instructions

Page: 20 / 128

Installation
*INSTALLATION*
20
. . . without partition wall
If the appliances are to be installed next
to each other without a partition wall
between them, they will need to be
joined together with the side-by-side
installation kit. In addition, you must
install the side panel heater to prevent
condensation from forming and any
resulting damage.
Specifications for the mains
water connection
– Connection to the water supply must
comply with the applicable
regulations in the country where the
appliance is being installed.
All units and systems used to supply
water to the refrigeration appliance
must also comply with the applicable
regulations in the respective country.
– The appliance may only be
connected to the water supply by a
suitably qualified technician.
– The quality of the water used must
conform to the requirements for
drinking water in the country where
the refrigeration appliance is being
used.
– Connect the stainless steel hose to
the fresh water supply and avoid
connection to a water supply in
which the water might stagnate.
– The appliance is only suitable for
connection to a cold water line.
– The water pressure must be between
200 kPa and 800 kPa (2 and 8 bar).
– A tap must be provided between the
stainless steel hose and the mains
water supply to ensure that the water
supply can be shut off if necessary.
– The tap should be easily accessible
after the appliance has been built in.