Miele F 2671 Vi, Operating And Installation Instructions

Page: 100 / 128

Operating the Ice/Water dispenser
100
Dispensing chilled water
After the initial commissioning, there
may be air in the water circuit.
Dispense water until there are no more
air bubbles.
All materials used in the Ice/Water
dispenser are odourless and do not
affect flavour.
If you dispense chilled water again
after a long period of time, the water
may be stale. In this case, pour away
the first 15 glasses of water.
Regularly dispense water/ice in order
to obtain the best water quality.

Place a sturdy container under the
Ice/Water dispenser.
 Press and hold the chilled water
sensor.
Chilled water will be dispensed from the
spout as long as the sensor is pressed.
After approx. 30 seconds, dispensing is
ended automatically. If you wish to
dispense more water, wait 5 seconds
and then press the sensor again.
If you want the water to be colder,
dispense ice cubes into the container
beforehand.
If a large amount of water is
dispensed, the water can become
warmer.
Dispensing ice cubes and crushed
ice
After the Ice/Water dispenser has
been switched on, it can take up to
24 hours until the first serving of ice
cubes is ready.
 Place a sturdy container under the
Ice/Water dispenser.

Press and hold the sensor for ice
cubes or crushed ice.
Ice will be dispensed from the spout as
long as the sensor is pressed.
After approx. 30 seconds, dispensing is
ended automatically. If you wish to
dispense more ice, wait 5 seconds and
then press the sensor again.

Take your finger off the sensor when
the container is almost full. Otherwise
it will overfill or the ice will block the
spout.
The ice cube maker can make up to
approx. 2.4 kg of ice cubes in
24 hours.
The amount of ice cubes produced
depends on the temperature in the
freezer.
The lower the temperature,
the more ice cubes are produced
within a given time.