Technical safety
~
Installation, repair and maintenance
work should only be performed by a
Miele authorized service technician to
avoid potential hazards. Installation,
repair and maintenance work should be
performed only by a Miele authorized
service technician.
~
Before installation make sure that
the voltage and frequency listed on the
data plate correspond to the household
electrical supply.
This data must match in order to avoid
damage to the appliance. If in doubt,
consult a qualified electrician.
~
Before installing the Combi Steam
Oven, check for externally visible
damage. Do not operate a damaged
appliance. A damaged appliance is
dangerous to your safety.
~
Be certain your appliance is
properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician.
~
Multiple power outlets or extension
cords are not safe (risk of fire). Do not
use them to connect the Combi Steam
Oven to the electrical power supply.
~
Do not use the appliance until it has
been properly installed into cabinetry.
~
Do not operate any appliance with a
damaged cord or plug, or if the
appliance has been damaged in any
manner. Contact Miele’s Technical Ser-
vice Department.
~
This Combi Steam Oven is not to be
used in mobile locations such as ships.
~
Never open the outer casing of the
appliance. Tampering with electrical
connections or components and
mechanical parts is dangerous and
could cause machine damage.
~
Defective components should be
replaced by Miele original spare parts
only. Only with these parts can the
manufacturer guarantee the safety of
the appliance.
~
The Combi Steam Oven must be
connected to the power supply by a
qualified electrician if the plug has
been removed from the power cord or if
there is no plug attached to the power
cord. A damaged power cord must be
replaced with a special cable. See
"Electrical connection".
~
Repairs should only be performed
by an authorized service technician.
Otherwise the warranty is void.
~
Do not repair or replace any part of
the appliance unless specifically
recommended in the manual. All other
servicing should be reffered to a
qualified technician.
~
Before installation or service,
disconnect the appliance from the
power supply by either removing the
fuse, "tripping" the circuit breaker or
unplugging the unit. Pull the plug not
the cord.
IMPORTANT SAFETY INSTRUCTIONS
9
Summary of Contents for DGC 6705
Page 14: ...Front view Guide to the appliance 14 ...
Page 138: ...138 ...
Page 162: ...162 ...
Page 164: ...M Nr 09 855 480 02 en US CA DGC 6705 DGC 6805 ...