Cleaning and care
65
Sensor cover
The sensor cover for the cup protection
cut-out is located under the main dis‐
penser. If the automatic dispenser ad‐
justment sensors do not clearly recog‐
nize a container, this sensor will stop
the main dispenser.
If required, the sensor cover can be
cleaned once a week in the dishwasher
or by hand using hot water and liquid
dish soap.
To remove, press and hold the sensor
cover between the dispenser nozzles
. Then press the main dispenser in
from the sides
.
This will release the sensor cover.
Refitting:
Insert both hooks at the back and
press the sensor cover upwards.
Maintenance of the milk valve
The milk valve should be cleaned once
a week to ensure good quality milk froth
without spraying.
The
Drinks
menu is displayed.
Tap
Main Menu
or
Back
.
Select
Maintenance
and then
Clean
the main dispenser
.
The main dispenser and the milk valve
will move into the maintenance posi‐
tion.
Important! Before confirming the
message in the display with
OK
, you
must
remove the cleaning brush.
Otherwise the coffee system will be
damaged.
Insert the brush in the milk valve and
move it back and forth.
Tap
OK
.
The milk valve will move into the correct
position and the milk pipework will be
rinsed through.
