To change the jet for the inner burner
d
Jet disc (main jet for the inner
burner)
e
Air intake sleeve
f
Vent
^
Whilst counterholding it in place with
an SW 12 spanner, remove screw
c
from fitting
b
using an SW 8
spanner.
^
Whilst counterholding it in place with
an SW 12 spanner, remove screw
fitting
b
from fitting
a
with another
SW 12 spanner.
^
Remove jet disc
d
from fitting
a
,
and replace with the correct jet disc
(see jet table).
^
Adjust air intake sleeve
e
until the
two vents
f
have a 2 mm gap as
illustrated.
Reassemble the parts in the reverse
order and check for leaks by operating
the burner without the upper part of the
cooktop in place (use a match to ignite
the flame).
Conversion to another type of gas
44
Summary of Contents for CS 1011
Page 49: ...49 ...
Page 50: ...50 ...
Page 51: ...51 ...
Page 52: ...Alteration rights reserved 5108 M Nr 07 235 550 02 ...
