Installing the appliance
^
Feed the connection cable down
through the cut-out.
^
Then drop the front edge of the
appliance into the cut-out.
^
Using both hands, press down
evenly on the sides of the appliance
until it clicks into position. When
doing this make sure that the seal
under the appliance sits flush with
the worktop on all sides. This is
important to ensure an effective seal
all round. Do not use sealant.
^
Connect the appliance to the mains
(see "Electrical connection").
^
Check that the appliance works.
Removing the appliance
If the appliance is accessible
from
below
, it can be pushed up and out of
the cut-out. It must be pushed up from
the back first.
If the appliance is
not accessible from
below
, take hold of the appliance with
both hands at the back, pull it forwards,
then lift it up and out.
Installing / removing the appliance
37
Summary of Contents for CS 1011
Page 49: ...49 ...
Page 50: ...50 ...
Page 51: ...51 ...
Page 52: ...Alteration rights reserved 5108 M Nr 07 235 550 02 ...
