Miele CS 1011, Operating And Installation Instructions

Page: 22 / 52

Stainless steel surfaces
Clean stainless steel surfaces using a
solution of warm water and a small
amount of washing-up liquid applied
with a soft sponge. In the case of
stubborn dried-on soiling, soak first.
Finally, dry with a soft cloth.
If necessary a cleaning agent for
ceramic and stainless steel surfaces
can be used (see "Optional
accessories"). Apply with even
pressure following the direction of the
"grain".
Do not use stainless steel cleaning
agents on
printed surfaces. This
would rub off the print. These areas
should be only cleaned with a
solution of warm water and a small
amount of washing-up liquid applied
with a soft sponge.
A conditioning agent for stainless steel
can be used after cleaning to help keep
your appliance looking good (see
"Optional accessories").
Apply sparingly with a soft cloth
following the instructions on the
packaging.
Pan support, control knob
Remove the pan support. Clean the
pan support and the control knob with a
solution of warm water and a small
amount of washing-up liquid applied
with a soft sponge. Stubborn soiling
should be soaked first.
After cleaning dry all surfaces with a
clean cloth.
Do not clean the pan supports in a
dishwasher.
Cleaning and care
22