Portion size
37
The flavour of the coffee produced
depends not just on the type of coffee
used, but also on the amount of water
used.
You can programme the amount of
water to suit the size of your cups and
the type of coffee you are using.
For coffee drinks that use milk, in
addition to the amount of coffee or
espresso, you can also set the amount
of milk or milk froth to be dispensed.
You can also set the portion sizes for
hot milk and milk froth separately.
Each type of drink has a maximum
portion size that can be programmed.
Preparation is stopped once this has
been reached. The maximum possible
portion size for this type of drink is then
saved in the machine.
The changed portion size is always
saved in the current profile. The name
of the current profile appears in the
top left of the display.
There are two ways to start
programming the portion amount:
– Either by touching the drink sensor
when you are making a coffee, or
– By selecting
Portion size
in the
Parameters
menu.
If the water container becomes empty
whilst making a drink, the machine will
stop programming the portion size.
The portion size will
not
be saved.
Tip:
To cancel changing the portion
size, touch the drinks sensor or
for
drinks in
Further programmes
.
Changing the portion size
while making a drink
Portion sizes for Espresso
and
Coffee
Place a cup under the central spout.
Touch
or
until
Change
appears
in the display.
Dispensing will start.
You can set the portion size as soon
as
Save
appears in the display.
When the cup is filled up to the level
you want, touch
OK
.
The portion size programmed in will
now be dispensed every time that
particular drink is selected.
Summary of Contents for CM6x10
Page 81: ...Dimensions 81 ...
