Miele CM6x10 Operating Instructions Manual Download Page 79 | Manualshive

Page: 79 / 84

background image

Electrical connection

79

All electrical work should be carried out
by a suitably qualified and competent
person only, in strict accordance with
current national and local safety
regulations (BS 7671 in the UK).
Installation, repairs and other work by
unqualified persons could be
dangerous. The manufacturer cannot
be held liable for unauthorised work.
Before connecting the machine make
sure that the voltage and frequency
quoted on the data plate are compatible
with your household electrical supply.
Please consult a qualified electrician if
you are in any doubt.

The required connection data is quoted
on the data plate. This can be seen on
the left-hand side when the drip tray is
pulled out.

The machine is supplied with a mains
cable with moulded plug for connection
to a 50 Hz 220–240 V supply.

The coffee machine must be connected
to the mains supply via a fused plug
and suitable switched socket.

WARNING: THIS APPLIANCE MUST
BE EARTHED.

The fuse rating must be at least 10 A
(13 A fuse in the UK).

The socket should be next to the
appliance and easily accessible. If the
socket is not accessible an additional
means of disconnection must be
provided for all poles.

Do not connect the machine to the
mains electricity supply by a multi-
socket adapter or an extension lead.
These are a fire hazard and do not
guarantee the required safety of the
appliance.

Do not connect the machine to an

inverter

such as those used with an

autonomous energy source e.g. solar
power. When switched on, peak loads
in the system can cause the safety
switch off mechanism to be triggered.
This can damage the electronic unit.

The coffee machine must not be used
with so-called

energy saving devices

either. These reduce the amount of
energy supplied to the machine causing
it to overheat.

If the connection cable is faulty, it may
only be replaced by a qualified
electrician in order to avoid a hazard.

Tip:

If the mains connection cable is too

long, push it up through the opening at
the back of the machine.

«
...
77
78
79
80
81
...
»

Summary of Contents for CM6x10





















































































Reviews:

No comments

Related manuals for CM6x10

Brand: MODO Pages: 8

Brand: Hamilton Beach Pages: 6

Brand: 3M Pages: 23

Brand: Maestro Pages: 23

Brand: Weber Pages: 56

Brand: Sencor Pages: 16

Dough Stretcher

Brand: AMF Pages: 2

Brand: Curtis Pages: 19

Brand: West Bend Pages: 68

Brand: Mahlkonig Pages: 16

Brand: Sunbeam Pages: 92

Brand: U-Line Pages: 13

4 Quart Wood Bucket

Brand: Rival Pages: 8

Brand: Santos Pages: 20

Brand: LAVAZZA Pages: 172

050-M80-013-T48

Brand: QUAMAR Pages: 100

Brand: LAVAZZA Pages: 64

Brand: Cimbali Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands