Cleaning and care
58
Remove the brew unit and
wash by hand
Danger of injury.
Disconnect the coffee machine from
the power supply before cleaning.
Clean the brew unit
by hand only
using hot water.
Do not use
washing-up liquid or any other
cleaning agent
. The moving parts of
the brew unit are lubricated.
Washing-up liquid or cleaning agent
will damage the brew unit.
Clean the brew unit once a week.
Open the machine.
Press the button under the handle of
the brew unit
and, whilst doing so,
turn the handle clockwise
.
Carefully pull the brew unit out of the
coffee machine.
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (See
"Problem solving guide").
When you have removed the brew
unit, do
not
change the position of
the handle on the brew unit.
Clean the brew unit
by hand under
hot running water
without using
washing-up liquid or any other
cleaning agent.
Wipe any remaining coffee off the two
filters (see arrows). One filter is
located in the funnel and the other to
the left of the funnel.
Dry the funnel to prevent ground
coffee sticking to it the next time a
coffee is prepared.
Carefully clean the inside of the
coffee machine.
Make sure you regularly remove any
damp ground coffee residues to
prevent the build-up of mould.
Tip:
Use your vacuum cleaner to
remove dry ground coffee residues.
To replace the brew unit, repeat the
previous steps in the reverse order:
Push the brew unit back into the
coffee machine, making sure it goes
in straight.
Summary of Contents for CM6x10
Page 81: ...Dimensions 81 ...
